Gibbo39

Gibbo39 | Posts: 312 @Del58 your post got cut off mate so we're all guessing a bit, but I'd echo what @SparkySailor is getting at — if you've fitted a DC-DC charger (Victron B2B I'm assuming...

Running a 200Ah lithium (LiFePO4) pack with a MultiPlus 12/3000/120 and I'm finding the low voltage disconnect is tripping way earlier than I'd expect.

Picked up a 200Ah 24V LiFePO4 bank off eBay last month — eight 3.2V 280Ah prismatic cells in 8S configuration with a Daly 100A BMS.

@WhatsAFuse65 Ha, @DazHenderson77 and @LazySocket have already clocked the obvious issues but to add something useful — garden offices are actually quite straightforward to size once you list your...

Gibbo39 | Posts: 847 @AlanJones63 Classic problem mate. The fix that sorted mine was fitting a Wakespeed WS500 regulator — it's specifically designed to handle lithium's charge characteristics and...

Gibbo39 | 47 posts @SOCGal Nice setup! One thing worth considering — keeping LiFePO4 perpetually sat at 80% is actually pretty sensible for longevity, but you might want to set up a scheduled...

Really feel your pain on this one @VickyMurray — went through exactly the same thing last winter on my 60ft trad. One thing worth looking at that hasn't been mentioned yet is your Victron's...

Really good point from @T5Dream there — I'd add that it's worth double-checking your shunt is properly calibrated against a known load too.