Really useful thread this — been meaning to ask about exactly this kind of setup for my garden office system.
Currently just relying on the VRM portal for monitoring, which works fine until the...
Has anyone actually measured the real-world difference in a garden office setup specifically?
I'm planning a Victron Multiplus-II with roof panels on my office and potentially AC coupling a...
Been going back and forth on this one for my own 3x3m setup. Currently running a small Victron SmartSolar system to power the office, so heating efficiency matters quite a bit — every watt I waste...
Been noticing something similar with mine, though I'm running it on a garden office setup rather than a van.
Really useful thread — got a SmartSolar 100/30 myself on the garden office and spent ages second-guessing this exact thing.
One thing worth flagging that I haven't seen mentioned: if you're also...
Not a narrowboat owner myself, but I've been researching this pretty heavily because I'm considering a liveaboard setup down the line.
From what I've gathered, a lot of trad stern owners end up...
Has anyone actually compared the Orion-Tr Smart 30A vs the 50A on a similar bank size? I'm in a slightly different situation (garden office rather than narrowboat) but weighing up the same...
I've got a 4kWp array on the garden office roof feeding a Victron Multiplus-II 48V system with about 15kWh of Fogstar Drift LiFePO4 cells.
@GafferTapeKing that cold January failure is a concern — my garden office setup needs to be reliable year-round, not just when the weather plays nicely.
One thing I'm trying to work out with these...
Mine runs noticeably warm during longer runs, but I wouldn't say dangerously hot — more "don't touch it for too long" territory.
Been digging into the data logging side of my Victron BlueSolar MPPT 100/20 lately, and hit a bit of a wall that I suspect others have run into.
When I export the SolarHistory.csv via...
Really interesting thread — I've been chasing something similar on my garden office setup with a MultiPlus-II 48/5000.
One thing worth checking that hasn't been mentioned yet: the AC input current...
@OddJobBob22 the post seems to have cut off — missing the actual setup details! What MPPTs are you running and what's the DC load situation?
Asking because I've been wrestling with something...
Has anyone actually tested the efficiency loss with a smaller genset running the MultiPlus II at partial load?
I'd suggest grabbing the Victron Remote Console app if you haven't already — makes config infinitely less painful than poking through that tiny screen.