Oak Tel

Good spot @CotswoldNomad and @DailyBuild — definitely worth sorting that out before we dig into specifics, as the charge current limits and assistant configurations will differ between the 3000...

OakTel | 1,203 posts @Macca97 Yeah, looks like your post got cut off — don't leave us in suspense! 😄 While we wait, I'll say the Fogstar Drift cells generally have a decent reputation but like...

OakTel | Posts: 412 | Location: Cumbria @SolarGeorge one thing I haven't seen mentioned yet — have you checked the surge rating vs your cooker's startup draw?

Really good point from @T5Project on the Voc ceiling — worth anyone in a similar setup actually doing the cold Voc calculation rather than just assuming you're fine because summer figures looked...

So I've been running a 100Ah AGM leisure battery in my Transit-based camper for a couple of years, fed by a basic split charge relay off the alternator. It's always been...

Something worth adding that I don't think anyone's covered yet — the non-isolated Orion-Tr Smart does run slightly cooler and more efficiently in practice, which matters if you're mounting it...

@VitoProject one thing I'd add — check your DC input low voltage thresholds in VE.Configure. If they're set conservatively (easy to do with LiFePO4 cells), the Multiplus can start throttling...

Been running a 280Ah LiFePO4 bank (4S, EVE cells) in my van for about eight months now and I keep having an issue where one cell – cell 3 if it matters – dips to around 2.75V before the JK BMS...

Yeah @Brummie84, noticed the same thing when I expanded my own bank recently. Victron's ESS assistant parameters in particular seem to shift between firmware updates without much fanfare in the...