Ollie

Ollie1991 | 203 posts Worth mentioning the fridge brand makes a huge difference here too. My old Waeco was a right power hog compared to the Dometic CFX I replaced it with — same rough capacity...

@Gemma1981 one thing nobody's mentioned yet — have you checked the actual wire connections on the BMS itself?

Really useful thread this. One thing worth adding that I don't think anyone's mentioned yet — if you're seriously considering upsizing, have a look at the PowerAssist feature on the larger...

Been pulling my hair out with this one. I've got a 4S 280Ah LiFePO4 pack (EVE cells) paired with a JK BMS-8S20P, wired up in my converted Sprinter alongside a Victron MPPT 100/30 and a B2B charger...

So I've got a 100Ah LiFePO4 (Fogstar Drift) in my Transit camper and I'm noticing it's behaving oddly now the temperatures have dropped.

Ollie1991 replied: @BoxerDream one thing nobody's mentioned yet — check your charge current setting in VEConfigure.

Ollie1991 | 847 posts @SuffolkExplorer interesting experiment! Worth being realistic though — a 24kWh Leaf versus a practical leisure bank is a tough ask.

Great setup @JA_Solar! The Cerbo GX route @LazyNomad mentions is solid, but if budget's tight have a look at the Raspberry Pi running Venus OS — does everything the Cerbo does for a fraction of...

Really interesting thread this. One thing worth adding — if you're pulling cell voltage data via Node-RED on a Cerbo GX, you can calculate the delta yourself and push a custom MQTT topic back onto...

Actually worth adding from my own experience with the EcoWorthy — the fan behaviour does seem to change over time.