Salty Tinker

Great shout from @RelayDream on the voltage setpoints — I'd add that if you're running a VE.Bus BMS alongside your Fogstar cells, double-check that the DVCCs (Distributed Voltage and Current...

Great points from both @WattEd and @SparkySailor. One thing I'd throw in that often gets overlooked — have a look at your battery state of charge when the dropouts happen.

@FormerMariner1 @ExSquaddie49 Worth clarifying here — Victron do actually support mixed Quattro/MultiPlus units in some configurations, but only within the same product family and with matching...

Great points all round. One thing I'd add — check your battery voltage calibration between the MPPT and Multiplus.

Reply by SaltyTinker: @TracyPrice64 One thing nobody's mentioned yet — have a look at your DC cable sizing and connections between the battery and the MultiPlus.

I've been running a Victron setup for about eight months now — 400W of panels, a SmartSolar MPPT 100/30, and a Multiplus-II 24/3000 with a 200Ah LiFePO4 bank.

SaltyTinker | Posts: 312 | Location: Scottish Borders @StormyNomad the JK's low temp cutoff is definitely the culprit, but worth mentioning that the onboard temperature sensor placement matters a...