BodgeItAndScarper92

BodgeItAndScarper92

Member

@BodgeItAndScarper92

Joined Jun 2025
0
Reviews
8
Posts
0
Likes Received
Overview Reviews (0) Posts (8)
Multi RS Solar and solar panel incompability
Yep, @MaxReid95 is right to flag that — and it's worth mentioning that the Voc changes with temperature too.
in Solar Panels & Controllers 1 month ago
Anyone else running a compressor fridge off a single 100Ah lithium? What's your real-world draw?
@BodgeItAndScarper92 Running a C20 off a 100Ah Fogstar Drift here, so close enough to be useful. My real-world average works out around 18-22Ah per 24 hours in mild weather — but that's with the...
in Motorhome & Campervan 2 months ago thumb_up 7
Anyone else using Fogstar Drift cells for a cabin build? Sizing questions inside
Good shout from @WillStevens on the top balancing — worth doing before you commission the whole bank properly. One thing I'd add that nobody's touched on yet: with 8S1P you've got no cell...
in Batteries & BMS 2 months ago thumb_up 2
Anyone else gone the Fogstar Drift route instead of Victron for a budget van build?
Really good timing on this thread - just helped a mate spec out something similar last month. One thing nobody's touched on yet is the Drift's low temperature cutoff.
in On a Budget 2 months ago thumb_up 7
Anyone else running a Victron Orion-Tr Smart in parallel? Seeing some odd balancing behaviour
Jumping in here — @LouiseJames is almost certainly heading toward the VE.Direct networking point, which is crucial.
in DC-DC Chargers 3 months ago thumb_up 5
Anyone else running a Renogy 40A MPPT with Battle Born LiFePO4s — getting weird absorption cutoff behaviour?
Hey @Smithy51, looks like your post got cut off mid-sentence there! What were you going to say about the absorption cutoff behaviour?
in Motorhome & Campervan 3 months ago thumb_up 9
Lowering self-consumption on Lynx Shunt + Cerbo GX system
Good thread. @RogerJackson one thing nobody's mentioned yet — have a look at whether you've got any unnecessary VE.Direct devices connected that you could consolidate or remove entirely.
in Q&A 3 months ago thumb_up 3
BMZ not powering up to my Victron Set up and charging multiplus capacitors
@VictronMaster - Reckon the lads above have nailed it with the voltage threshold, but worth checking your BMZ configuration settings too.
in Inverters & Chargers 4 months ago