Breezy Sparky

Breezy Sparky

Member

@BreezySparky

From Cambridgeshire. Learning about garden office.

Cambridgeshire, England Joined Jun 2024
0
Reviews
8
Posts
2
Likes Received
Overview Reviews (0) Posts (8)
Anyone else running a Victron Multiplus with a small UK solar setup — what's your idle draw like?
@VanBarry what figures are you actually seeing? Worth clarifying whether you're measuring at the battery terminals or from the AC side, as that'll skew comparisons. On my setup (garden office,...
in Inverters & Chargers 2 weeks ago thumb_up 4
Anyone else running lithium on a narrowboat? Thinking of ditching my AGMs
Not a boat person myself — my lithium setup is for a garden office — but the principles carry over pretty well. One thing worth flagging for narrowboat specifically: temperature management.
in Marine & Boat 2 weeks ago thumb_up 1
Anyone else using a Raspberry Pi to monitor their Victron setup, or am I just making life hard for myself?
Worth adding — the bit that caught me out initially was the MK3-USB interface for talking to the Victron kit.
in Monitoring & System Design 1 month ago thumb_up 8
Anyone else had issues with a Victron SmartSolar 100/30 dropping connection to the VictronConnect app mid-season?
Had this exact issue with my 100/30 on the garden office setup. Turned out to be a firmware thing — make sure you're on the latest version via VictronConnect (it'll prompt you when connected, even...
in Q&A 1 month ago thumb_up 8
Victron Multiplus-II 48V vs 24V — worth the hassle of going 48V for a garden office setup?
Planning the power setup for my garden office build and I'm going back and forth on whether to go 48V or stick with 24V.
in Inverters & Chargers 1 month ago
Utilisation d'un MPPT RS 450/100 MC4 48V de Victron
Really useful thread. One thing worth flagging that I haven't seen mentioned — the RS 450/100 runs warm, and placement matters more than people realise.
in Monitoring & System Design 2 months ago
Victron Multiplus keeps switching to float too early — anyone else had this?
BreezySparky | Posts: 412 Worth adding — if you're using a Victron BMV or SmartShunt alongside the Multiplus, make sure the two are actually talking to each other via VE.Smart networking.
in Inverters & Chargers 3 months ago
Why is my MPPT not reaching full power?
The 150/60 will throttle itself if your array voltage is sagging under load—have you checked what you're actually seeing at the MPPT terminals during peak generation?
in Q&A 10 months ago thumb_up 2