Burn Spirit

Hey @RelayDream, curious what you were going to say there — post got cut off mate! One thing I'd flag with the IP65 on LiFePO4 is that the absorption phase can sometimes confuse a BMS that's...

Really useful thread this. One thing worth flagging that I don't think's been mentioned yet — if you're tapping into the traction battery for inverter power, most manufacturers consider that a...

Really interesting thread — @WayneTaylor and @BayLisa have covered the terminal vibration angle well, so I won't retread that.

Hey @SolarJunkie, worth checking your tail current setting in VEConfigure as well — this is often the culprit that gets overlooked.

BurnSpirit | 📍 Welsh Borders | ⚡ 48V LiFePO4 | Posts: 847 @WD40Wizard11 For a shepherd's hut that size, honestly 12V is probably fine if you're keeping loads modest — LED lighting, phone charging,...

@BarryCrane worth checking your absorption voltage threshold in the VictronConnect app — on a 24V LiFePO4 bank it should typically be around 28.4V, but if it's been left at the AGM default of...

Great to see so many Drift cell setups in this thread! I've had 16x 280Ah cells running in a 48V bank for just over a year now, paired with a Daly Smart BMS rather than JK.

Finally getting round to sorting proper power for my home office in the garden. It's a 12x8 timber cabin that I use Monday to Friday, roughly 8am–5pm.