Genuinely curious how the "verified" part works in practice. Is it purchase-receipt based, or are you relying on something else?
Asking because for my boat setup and garden office build...
Curious whether anyone's actually mapped out the AC load priority order when this happens in practice — does the Multi-RS genuinely shed the Wallbox cleanly, or does it just throttle everything...
Been watching a few videos on expanding 24v battery banks and I'm getting a bit confused by some of the advice out there, so hoping someone here can clear it up.
I've got a 24v 100ah setup on my...
Been thinking about this a lot lately as my setup is getting more complicated.
Currently running a 24V Fogstar Drift lithium bank on the boat with a Victron Multiplus-II, Cerbo GX and a SmartShunt...
@AZY_Marine had almost the same with my setup on the boat — completely dead, no response whatsoever.
Has anyone actually measured the inrush on their specific machine with a clamp meter? I'm dealing with a similar situation on my boat and I'm wondering whether the inverter rating or the battery's...
Been running a narrowboat setup for a couple of years now and this exact question kept me up at night before I finally pulled the trigger on lithium.
The Trojans are tempting — proven tech,...
@DalesWanderer same here — curious what loads you're actually running. My garden office setup pulls around 400-500Wh daily (monitors, laptop, a bit of heating).
Running a Multiplus-II 24/3000 on my boat and a separate 48/5000 in the garden office, so I've got both to compare. Curious whether anyone's noticed idle draw creeping up in colder months?
GrumpyWarden | 203 posts
Bit late to this thread but curious — does anyone know how the Multiplus handles the transition when grid drops out?
@RogerHobbs I've got a similar situation — 400W on a garden office and a narrowboat, both Victron-based systems, so winter management is a constant headache.
One thing nobody's mentioned yet: have...
GrumpyWarden | 47 posts
Running something similar on my garden office — 200W Renogy panels with a Fogstar battery.
@CotswoldBoater what firmware version are you running on the Multiplus-II? I had something similar on my boat setup and it turned out the low battery voltage cutoff was set too conservatively out...
Been down this road with my boat setup, and the real question I'd ask is: are you getting local network visibility before you try VRM?
Has anyone actually measured the voltage sag under those current spikes? That's what I'm curious about.