Neil

Neil1962 | Posts: 847 @ExSquaddie49 The 3000VA MultiPlus-II is genuinely marginal for induction hobs — most pull 2000W sustained but the initial surge can spike considerably higher.

Neil1962 | Posts: 847 | Location: North Yorkshire @SolarGeorge the 3000VA unit is really only rated to about 2400W continuous if I recall correctly, and a cooker — especially on the initial...

After two seasons running a basic split charge relay on the van I finally caved and bought a Victron Battery Isolator Manager (the 90A version) to keep my 200Ah leisure battery topped up from the...

I've got a Victron SmartSolar 100/30 feeding a 200Ah lithium (LiFePO4) bank and I'm increasingly convinced the SOC readout is basically fiction.

Ha, glad it's not just me going mad then! 😄 @GoldenBodger please do finish that sentence, we're all hanging here! Just to add a bit more detail to my original post - the dropout seems to happen...

@RelayAdventure I've got a fairly similar mix here — Cerbo GX talking nicely to Victron kit but the third-party bits are always the faff.

@TorJake another one cut off mid-sentence, you're in good company with @RayWatson81 at least! 😄 While we're all guessing — one thing I'd check fairly early on is whether your BMS is asserting a...

@Jock90 Had almost identical on my setup last summer. Worth checking whether your BMS is actually communicating properly over the CAN bus — in VictronConnect, go to the DVCC screen and look at...