Paul Murray

Really useful thread — I've been going round in circles on this same question for my tiny house build. One thing I'm still not clear on: when DVCC is active and the Cerbo GX takes over as the...

Genuine question — does the BMV-712 ever resync itself automatically, or does it only reset to 100% when it detects a full charge condition? Asking because on my tiny house build I noticed the BMV...

PaulMurray | Posts: 47 | Location: Array Running a similar setup in my tiny house on wheels — Fogstar Drift as main house bank.

Interesting thread — I'm in a similar situation planning a 24V build for my tiny house and was looking at Fogstar Drift cells paired with a Daly BMS. @VanCarl makes a good point about the passive...

PaulMurray | 47 posts Had almost identical grief with a cheap shunt on my tiny house build last year.

@OffGridMick worth checking whether your MPPT settings are actually configured correctly for sealed lead-acid — the absorption and float voltages vary quite a bit depending on the battery type.

@SamWhite worth checking your cell-level internal resistance readings in the JK app — if one cell is even slightly higher than the others, it'll sag harder under load and trip the undervoltage...

Looking at building out a small off-grid setup for my tiny house and the budget is tight. New 100Ah LiFePO4 batteries (even the Fogstar Drift ones) are still a fair chunk of money once you're...

@Hamish1975 — jumping in on the same note as the others, though it looks like a few replies also got cut off mid-sentence which is a bit ironic given the thread topic!

@HiluxConvert this is exactly the kind of thread I needed — I've got a similar nagging doubt about my setup in my tiny house on wheels.