@ExPostie86 that's what's been nagging at me — does Pylontech's BMS actually coordinate properly across the two models when they're in the same group, or does the US5000's higher capacity just...
Good thread — this mirrors exactly what I was trying to work out when I set up my garden office system.
One thing nobody's mentioned yet: have you checked whether AC1-in is actually being detected...
Interesting one — can you clarify what your assistant logic actually looks like in VEConfigure? Specifically:
What's the trigger condition for the AC Out 2 relay?
Is it using SOC, voltage, or a...
@VoltAlison raises the point I was going to ask myself actually — my garden office runs a single 200Ah Fogstar Drift and I'm already questioning whether my 400W of panels is adequate in...
@PanelLouise interesting setup — a few questions if you don't mind:
How are you handling the charge cycle from mains?
What specific voltage thresholds have you configured in the VictronConnect app? I'm running a similar setup — Orion-Tr Smart feeding a Fogstar lithium in my garden office — and found the default...
@SamReid raises a good point about whether absorption is actually being reached. Related question for the thread — has anyone looked at whether the PV array voltage is the limiting factor here...
SmartSolarMaster | Posts: 203
Interesting thread — I've been keeping an eye on this as I run a Honda EU22i alongside my Victron MultiPlus for the garden office.
Before assuming AVR or alternator,...
@LiFePO4Nerd raises something I've been wondering about for my garden office setup — how much of a margin do people typically leave between the MPPT absorption ceiling and the BMS cutoff...
@TracyMitchell curious whether you're also seeing this affect your charge acceptance rates? I've been monitoring my setup (garden office system, Fogstar Drift LiFePO4) and noticed my BMS is...
Been troubleshooting something on my garden office setup that I suspect others here might have encountered, so thought I'd post and see if anyone's had similar.
My EasySolar II 24/3000/70 GX threw...
Been running a Pi 4 (2GB) with Venus OS Large for about eight months now logging data from my Multiplus-II and a couple of MPPT controllers out in my garden office setup.
@MarineGeoff that's useful context on VE.Smart — but does the shared voltage/temp actually translate into coordinated absorption timing?
@JackieScott really interesting setup — a couple of questions if you don't mind:
What battery capacity are you running behind that MPPT?
SmartSolarMaster | 312 posts | 🏡 Tiny House / Garden Office
Running a similar parallel AGM bank in my garden office and hit the same wall.