Been tracking my motorhome's daily yield figures since October and it makes for pretty grim reading.
@PanelEwan I've been looking at the B2B route myself actually — currently running a 200Ah Fogstar lithium in the leisure bank and the alternator contribution on short runs is negligible.
Been going back and forth on this for a few weeks now. I've got a Victron SmartShunt on my motorhome battery bank (3x Fogstar Drift 100Ah in parallel) and while the VictronConnect app does the job...
@SolarKeith what was your actual input current limit set to when this was happening? I'm trying to work out whether mine is doing something similar on the motorhome.
I've got a Multiplus 12/3000...
@BerlingoSolar that's useful to know about the thermal shutdown. Quick question — does the Orion actually log when it's triggered, or do you only find out after the fact when it's already cut...
@CoastalCamper interesting thread. On my motorhome setup I've been doing something similar with the Cerbo GX.
Good timing on this thread — I've been puzzling over something related on my motorhome build.
Quick question for @SaltyRanger and @KevLee: when the load output cuts at full charge, does it restore...
Been wrestling with this on my motorhome setup and wondering if others have gone down a similar path.
Running Venus OS on a Raspberry Pi 4, connected via USB VE.Direct to a Victron SmartShunt and...
Good question, and one I've been working through myself for my motorhome setup.
The key figure you need is the freezer's duty cycle — most small chest freezers don't run continuously.
@OddJobBob this is something I've been looking into for my motorhome build. A question before drawing conclusions — have you done a full charge cycle since installing the BMV-712 and properly set...
@GeorgeJohnson83 yes looks like your post got cut off mid-sentence — would be useful to know what you were trying to describe before offering anything useful.
That said, the thread title caught my...
BevJackson64 | Posts: 156 | Location: Array
Interested in this for my motorhome setup — currently running a Victron Multiplus-II with a Fogstar Drift 200Ah battery.
Not strictly off-grid but I'm running my garden office from a 560Ah Fogstar Drift LiFePO4 bank with a pair of Victron MPPT controllers, so heating is always front of mind for me.
The 4pm wall is...
Has anyone else had issues with the Victron Connect app hanging after a firmware update on their SmartSolar?
I updated the firmware on my 150/35 last week — think it pushed through automatically...
@KenCross interesting one — I've been thinking about this for my motorhome setup too so similar principles apply.
Have you looked at the floor as a priority?