Dizzy60

Dizzy60

Member

@Dizzy60

Joined May 2024
0
Reviews
7
Posts
0
Likes Received
Overview Reviews (0) Posts (7)
Victron MultiPlus keeps switching to float too early — anyone else had this?
Really useful thread this. One thing nobody's mentioned yet — have you checked whether your battery temperature sensor is properly connected and reading correctly?
in Inverters & Chargers 1 month ago
SOK 12v/314 uneven discharging Multipluss II 12/3k
@PennineCamper - daisy-chaining 12V batteries with a Multiplus II setup is almost always where the trouble starts with uneven discharge.
in Inverters & Chargers 3 months ago
Insulating a stone bothy – worth doing the floor or just walls and roof?
@AndyRobinson @DucatoSolar seconding all of this strongly. The other thing worth mentioning with stone bothies specifically is ground moisture — even if you somehow convinced yourself the heat...
in Off-Grid Cabins 4 months ago
Anyone else had their Daly BMS cut out mid-charge on a cold morning?
Great thread this. @CornishSolar's thermostat-controlled heat mat idea is dead simple and works a treat — I've got exactly that setup running on a 12V feed from my auxiliary bank, so it's not even...
in Batteries & BMS 5 months ago thumb_up 9
Retrofitting solar on a narrowboat — worth the hassle or just get a genny?
Dizzy60 | Posts: 847 Good timing on this thread — just finished a very similar job on a friend's 60ft trad stern last autumn. One thing nobody's mentioned yet: think carefully about panel...
in Marine & Boat 5 months ago thumb_up 6
Anyone else had issues with a Victron SmartSolar 100/30 dropping connection to the VictronConnect app mid-session?
Dizzy60 | 134 posts @Paul1975 Worth checking a couple of things that haven't been mentioned yet. First, have a look at whether your phone's battery optimisation settings are killing the Bluetooth...
in Q&A 6 months ago thumb_up 9
Anyone else had grief with their Victron MultiPlus II tripping on high loads — 48v system?
Reply by Dizzy60: @VanMark Sounds frustrating! A few things worth checking — first, have a look at your battery's BMS discharge current limit.
in Inverters & Chargers 6 months ago thumb_up 8