@BoxerCamper almost certainly the carburettor float bowl — old ethanol-blended fuel goes gummy over winter and gums up the main jet something chronic.
@FogstarGal @FellGraham that analogy is entertaining but I'd like to pin down the actual numbers before anyone adjusts their settings based on this thread.
On the MPPT 75/15 specifically — does...
Good points from everyone already on the absorption and temp sensor fronts — one thing nobody's mentioned yet: have you checked whether your MPPT is actually configured for LiFePO4 chemistry, or...
@EmmaEdwards82 makes a fair point about the input threshold, but I'd want to clarify exactly which setting you're adjusting — there's a distinction between the input voltage lockout and the input...
FormerMariner1 | 89 posts
Following on from @EssexNomad's point about thresholds — can someone clarify the exact interaction between the "charged voltage" setting and the "tail...
@24VPro this is directly relevant to my van setup — I'm running a Fogstar Drift 100Ah and the BMS disconnect scenario is something I've actually stress-tested deliberately.
The specific behaviour...
@RustyRoamer interesting thread. Quick question though — when you say "pulling data from the Cerbo GX," are you doing that via the MQTT broker running on the Cerbo itself, or are you...
@PN_Camper what exactly counts as "complete" though? That's what I'd want pinning down before anything else.
@RustySkipper raises a fair point about actual measurements — has anyone logged their Victron data through the Victron Connect app over a full winter month and exported it?
Slightly tangential but relevant — does the OP know which specific inverters they're running? The grounding behaviour can differ quite a bit between models.
@RetiredPlumber Before you commit, can I ask how reliable the Solarman API actually is in practice? I've seen mentions elsewhere that the cloud dependency is a significant weak point — if...
@RussHunt82 just to clarify something pedantic but I think it matters here — are you certain the negative AcPowerSetpoint is actually being written to the correct path on the DBus, or is DESS...
@StormyWelder Curious about something specific — what's your panel Voc versus your battery bank voltage?
@FormerMariner24 when you say the threshold is being misread — are you able to clarify whether the displayed value in the app is wrong whilst the BMS is still triggering at the correct threshold...
Picking up on what @RetiredSquaddie said about ESS modes — does anyone know whether Victron's MPPT actually curtails output at the hardware level when ESS signals zero/negative pricing, or is it...