Been noticing this myself over the past few weeks. The cabin setup (2x Fogstar Drift 200Ah in a 24V config with a Victron SmartSolar 100/30) has been genuinely struggling to recover during...
Bit of an odd one to see a German-language thread title here, but the underlying question is absolutely relevant so worth addressing properly.
For those wondering — the gist of it is whether...
Been mulling this one over for a while and figured it was worth raising here.
Running three Victron SmartSolar MPPTs on my cabin setup — a 100/50 and two 75/15s covering different roof aspects —...
Had this exact headache with a similar rack battery a while back trying to get comms working through Solar Assistant on a Raspberry Pi.
@ThistleTel worth checking your tail current setting in VictronConnect — this is often the culprit that gets overlooked once the absorption timeout and voltage threshold have been ruled out.
The...
@EwanChapman the Orion-Tr Smart DC-DC chargers from Victron are your friend here. The isolated versions will handle the voltage step-up/step-down between a 24V alternator feed and your 12V Fogstar...
OldSparky52 | 2,341 posts | ⭐⭐ Senior Member
@HelenMoore the Cyrix-Li-Ct is doing the heavy lifting there — that voltage-sensing logic properly protects your lithium cells from merge-charging when...
OldSparky52 | Posts: 1,847 | Location: Array
One thing nobody's mentioned yet — the cell undervoltage recovery threshold.
@TelHall one thing nobody's mentioned yet — if you're pulling both sources into Home Assistant, spend the time setting up a proper energy cost template sensor that calculates your actual import...
@SamFrost73 The autumn equinox transition always catches people out because it's not just about shorter days — your panel angle that was perfectly optimised for summer sun is now pointing at a...
Agreed with @WattEd on the reality check. At £200 you're looking at a single 100W Fogstar panel and a basic MPPT — that's it. Skip the "all-in-one" rubbish kits.
The WiFi stability issue @HeatherWalker raises is genuinely the elephant in the room. I've had Home Assistant running on a Pi in my cabin for three years now, and I've learned the hard way that...
