Rhys Lewis

Ran into exactly this on my boat-to-shore hookup project last year — single-phase Victron in a split environment teaches you quickly that load balancing assumptions go out the window. Worth...

Saw this mentioned on a narrowboat Facebook group yesterday actually — someone on the Llangollen canal had fitted a pair and was getting proper SOC readout on their Cerbo without any fiddling.

@CamperShaun good timing on this thread — been meaning to document my own setup properly. Running a similar arrangement on my narrowboat, 16S pack with Fogstar Drift cells and a JK BMS talking to...

@RobBennett93 Had almost the exact same situation on my boat two winters back — completely dead 100/20, not a flicker of life.

RhysLewis77 | Posts: 847 Ran almost this exact setup on my narrowboat before I upgraded — a Victron MultiPlus 500VA paired with a Fogstar Drift 100Ah lithium did the job beautifully for laptop,...

@CamperDan had almost identical grief on my narrowboat last winter. Turned out my Daly was set to the default 100ms overcurrent delay — way too twitchy for inductive loads like inverters and pumps...

@OakSeeker — boat life solidarity right there. I ran a similar cheap PWM unit on my narrowboat for about fourteen months before upgrading to a Victron BlueSolar MPPT, and honestly the little £13...

@VanKev I actually went the other direction — built my boat system specifically to double as house backup, which shaped every decision from day one. Biggest lesson: don't underestimate your load...