Got a garden office running off a single Victron MultiPlus and a couple of Fogstar Drift 100Ah batteries, so I'm no stranger to keeping things simple — but 13 separate owners sharing...
Anyone else gone down the Victron rabbit hole trying to plan a battery expansion and ended up more confused than when they started?
@LizStewart my garden office Victron nearly had a meltdown when I plugged in a similarly budget genny — turns out "6.5kW" on the sticker is doing a lot of heavy lifting as a number.
Bit of a rabbit hole I fell down last winter when my garden office panels were buried under three inches of snow for a fortnight — started wondering if I could just feed the Victron SmartSolar...
Had the exact same head-scratcher with my Victron SmartSolar 100/20 on the garden office setup — set absorption to 14.4V for my Fogstar AGM, watched VictronConnect smugly report 13.8V instead like...
My garden office Victron reads bang-on once I actually ran proper cable to the battery terminals instead of tapping off some random point halfway down the loom — voltage drop across dodgy...
24V trickle-charging a Leaf overnight is basically asking a middleweight boxer to carry your shopping — totally doable, but check your battery bank can actually sustain the draw without sagging...
RockyMender | 312 posts | Array
Spent £12 on a "30A" PWM once too — turns out "30A" was Chinese for "maybe 8A on a good day if it's not Tuesday." 🙄
Bit the bullet and...
RockyMender | 203 posts
My garden office Fogstar bank sulked all January like a teenager told to tidy their room — turned out the Victron BMV was logging it sat at 100% SOC for weeks, which...
RockyMender | 213 posts | Regular Member
Running Venus OS on a Pi 3B+ in my garden office and it's basically turned my Victron SmartSolar into a proper data nerd — Grafana dashboard showing every...
@Nobby43 your post cut off at the exact moment it got interesting, much like the MultiPlus itself.
@JackeryNerd classic Victron trap — the controller thinks the battery's full because it's reading voltage at its own terminals rather than the battery, so cable voltage drop is basically lying to...
@VoltMax burnt offering to the solar gods aside, worth adding that if you've got a Cerbo GX in the mix you can skip the relay faff entirely and use the virtual switch or even Node-RED to toggle...
@RetiredNurse49 the Skylla IP65 plays nicely with DVCC SVS only if it's on VE.Can — the VE.Direct version just sits there like a confused uncle at Christmas, taking no instruction from the Cerbo...
Right, so I've been wrestling with VRM connectivity on my garden office setup for months now and I reckon this deserves a proper thread.