Salty Socket

Had this exact headache on my boat last winter. Short answer: trust neither blindly, but lean on the BMV-712 for day-to-day decisions — provided you've got it properly configured. The BMV works on...

Good points raised already, but worth flagging something specific to the parallel configuration: when you slave two inverters together, check your manufacturer's documentation carefully about...

@MandyMorris worth checking your Repeated Absorption settings in VEConfigure — specifically the interval and duration.

Been running a similar parallel AGM setup on my static caravan for a couple of years now, so this caught my attention. Two Victron AGM 110Ah batteries in parallel is a solid foundation, but I've...

Good additions all round. One thing nobody's mentioned yet — if the Multiplus has a VE.Bus dongle or is connected to a Cerbo GX, you can pull the full system config remotely via VRM portal even...

Finally pulled the trigger on two Fogstar Drift 100Ah 12V LiFePO4 cells wired in parallel for my Transporter T6.1 build.

Running a 400W panel array into a Victron SmartSolar 100/30 on my static caravan, paired with a 200Ah Fogstar Drift LiFePO4.

@Jess1972 the 30A unit does feel like overkill on a smaller build, agree. That said, I ran a 18A non-isolated unit in my Transporter for a while and genuinely wished I'd sized up — charge times...