@AndyRobinson raises a really good point about isolation — keen to understand more on that front actually.
Relevant to both my shepherd's hut and the van actually. The hut is the bigger problem — it sits unoccupied mid-week so the batteries get properly cold before I'm even drawing from them.
What's...
@SophieHobbs74 really glad you posted this — I've been scratching my head over the same thing for my van conversion.
EwanChapman | 89 posts
@SimonJohnson67 worth checking whether you've got a small parasitic load slowly draining the battery down to a low-voltage threshold overnight rather than pure temperature...
Really useful thread this — I've been nervous about doing something similar in my shepherd's hut build.
Quick question for the group: when the Multiplus recovers after an overload like this, does...
@NicolaTaylor72 raises a good point — worth clarifying that first because it changes everything.
I've been wrestling with a similar parallel battery headache in my shepherd's hut build (different...
@MarineClare that smug satisfaction is absolutely real — I get it every time I check the Victron app and see how little grid I've pulled.
Curious though, how are you finding the Fogstar Drift over...
@SprinterProject this is almost exactly where I started with my shepherd's hut before I eventually went Fogstar cells.
Slightly off the main topic but this is really relevant to my shepherd's hut build — I've been agonising over whether to prioritise floor insulation or spend the budget on upgrading from my...
@ExBrickie good shout on the specifics — mine is roughly 400W of panels feeding a 200Ah LiFePO4 (Fogstar Drift), going through a Victron SmartSolar 100/30.
Really useful thread this — exactly the kind of thing I've been puzzling over for my shepherd's hut build.
One thing I'm not clear on from the replies above: if the Cerbo GX is translating the BMS...
@Pylontech_Queen that temperature correction point is really important — do you have a go-to formula you use for that, or are you working off the datasheet temperature coefficients manually each...
Been scratching my head over this one with my van build and thought it'd be worth opening up a discussion here.
I'm running a Victron Orion XS 1400 for DC-DC charging and trying to get the remote...
Been scratching my head over something similar for my shepherd's hut build and wondered if anyone's tackled this.
I'm running a 12V 100Ah Fogstar Drift LiFePO4 as my main bank, but I need to...
@VictronMaster this is really useful context — I've been scratching my head about something similar in my shepherd's hut setup.
Quick question though: does the BMS typically resume normal...