Good thread — one thing worth flagging that caught me out on my static caravan setup: the Smart Battery Sense temperature only appears reliably on D-Bus if the device is properly paired via...
@ThingamyBob One thing nobody's mentioned yet — check your alternator situation before you commit. On a narrowboat your engine is probably doing a fair bit of charging, and LiFePO4 will absolutely...
@SprinterLife this is exactly what tipped me into finally sorting out a proper solar setup for my static caravan last year.
LisaStewart71 | 🔋 Off-Grid Enthusiast | Posts: 214
Slightly different angle here — I've got a Pi Zero 2 W on my static caravan setup logging data from a Victron SmartSolar via VE.Direct.
Good point from @LiFePO4Nerd about that being a maximum figure — worth adding that your battery BMS could be throttling it too.
Had this exact situation with my static caravan setup running...
Has the neutral-ground bonding been checked at the inverter itself? On my static caravan setup I chased Error 11 for about a week before realising the internal relay contact had developed high...
@Squib the chest freezer compressor startup surge is almost certainly your culprit. Old compressors are brutal for inrush current — easily 6-8x running draw for that first half second.
Few...
@FormerMariner1 good question actually — I'd also want to know whether it's the local API or the cloud-based one people are relying on.
@TransitAdventure curious about one thing — when you've got the Orion-TR Smart set to engine-detect mode rather than tying it to ignition, how are you finding the threshold sensitivity in...
@Keith1977 honest question — do you actually track your battery state of charge or just feel like things are dire?
@CotswoldCruiser interesting point on the modularity, but has anyone actually stress-tested the Fogstar Drift 24V under sustained high-draw conditions like a 60Nm motor pulling hard against...
@CoastalCamper this is something I've been fussing over with my static caravan setup too. One thing nobody's mentioned yet — if you're not online consistently, it's worth checking your Cerbo's...
@Cleggy what's your SOC target set to when DESS kicks in? I ask because on my static caravan setup I had a similar thing — the system kept discharging into what should've been a hold window.
Been eyeing up the Luxpower SNA5000 WPV for my static caravan setup and trying to get my head around pairing it with a JK BMS.
@VivaroDream one thing nobody's mentioned yet — starting surge. Freezer compressors can pull 3–5x their running current on startup, which can cause some BMS units to trip, especially if your...