Luton Nomad

Luton Nomad

Member

@LutonNomad

ev charging enthusiast from Cambridgeshire.

Cambridgeshire, England Joined Aug 2024
0
Reviews
11
Posts
2
Likes Received
Overview Reviews (0) Posts (11)
Anyone else struggling to keep a 12v compressor fridge running overnight on a single leisure battery?
Been there with this exact headache. Single leisure battery just doesn't cut it for a compressor fridge overnight — you're looking at roughly 30-50Ah consumed depending on ambient temp, and most...
in Motorhome & Campervan 1 month ago
Anyone else charging an EV from a Victron MultiPlus without tripping the shore power limit?
Running a MultiPlus II 48/3000 in my setup and trying to trickle charge my Nissan Leaf overnight. Got the PowerControl set to 16A shore limit but the inverter/charger keeps pulling too much when...
in Inverters & Chargers 1 month ago thumb_up 3
Anyone else running Victron MPPT alongside cheap Amazon panels — what's your actual real-world yield?
LutonNomad | 89 posts Running four 250W panels from a random eBay seller paired with a Victron SmartSolar 150/35 — panels are probably genuinely closer to 200W real-world but honestly the Victron...
in Solar Panels & Controllers 1 month ago thumb_up 2
Anyone else running Victron on a static caravan? Share your setup
Interesting thread this. Running a Victron Multiplus-II 3kVA on my static in Luton — mainly because I wanted proper EV charging capability alongside the usual loads. Got 800W of panels feeding a...
in Off-Grid Cabins 2 months ago thumb_up 6
Anyone else running a Victron Orion-Tr Smart in temp extremes — how's yours holding up?
Something nobody's mentioned yet — if you're charging the Drift from a leisure battery bank rather than directly from alternator/solar, make sure your source bank isn't also sagging in the cold.
in DC-DC Chargers 2 months ago thumb_up 9
Anyone else running a Victron Multiplus on a boat — how are you handling the shore power integration?
@SophieHill is right but worth adding — set your input current limit in VictronConnect to 16A (or a bit under, like 13-14A) so the Multiplus doesn't try to pull more than your pedestal can give.
in Inverters & Chargers 3 months ago thumb_up 8
Anyone else struggling to get accurate SOC readings with a PWM controller on AGM batteries?
@JaneReid68 yeah PWM + AGM is a rough combo for accurate SOC. The controller's basically just guessing at voltage, and AGMs have a notoriously flat discharge curve so voltage tells you almost...
in Solar Panels & Controllers 3 months ago thumb_up 6
Flexible "IgnoreAC" with Node-Red, rather than VeConfigs VirtualSwitch
@RetiredChef dead right on the logic side. Been doing similar for EV charging — node triggers IgnoreAC based on SOC and time-of-use tariff windows.
in Inverters & Chargers 4 months ago
Victron Multiplus keeps cutting out when the washing machine kicks in
@Squib82 worth checking your PowerAssist settings too — if you've got shore power connected it can buffer the surge draw rather than the inverter taking the full hit alone. Also on a 24V system...
in Inverters & Chargers 4 months ago
Van solar MOT check — does it affect anything?
Cheers for starting this thread, been wondering same thing myself. Got a 600W setup on mine with a proper Victron MPPT controller bolted down properly. From what I've gathered, MOT is just about...
in Motorhome & Campervan 7 months ago thumb_up 1
When is cheap too cheap? False economy stories
Been through this with EV charging setups. Grabbed a cheap MPPT to run my charging box off-grid, figured the Victron was overpriced marketing bollocks.
in On a Budget 1 year ago thumb_up 1