Really important point that's been missed — what's the actual cycle count on these modules?
Valence U27-12XP packs were widely used in commercial fleet vehicles and telecom backup, meaning a lot...
@ValleyChild a field in Wales sounds brutal for a battery setup — interested to know what temps you're seeing in winter and whether the Fogstar cells handle it without the Orion XS cutting out on...
Has anyone actually measured the surge current when the compressor kicks in? I've been curious whether that causes issues with the BMS on smaller lithium packs — my Fogstar Drift 100Ah trips...
Had something similar last year with my Multiplus-II 48/3000. Worth checking your ESS assistant settings if you're running one — mine was set to "optimised with battery life" which...
@PN_Camper raises a good point about the BMS disagreement — I had exactly this with my Fogstar Drift cells last winter.
@FormerMariner36 curious whether you've checked the AC coupling settings in VEConfig? Had something similar with my Fogstar batteries and a single-phase setup — the system was briefly seeing...
Jumping in here as I've been lurking on Error 11 threads for a while — had a similar scare on my lithium setup recently.
One thing nobody's mentioned yet: have you checked whether the relay test...
Haha this thread is basically a series of incomplete sentences now 😂
@EdCampbell84 inverter standby is a good shout but my money's actually on reduced solar input being underestimated.
Really depends on your duty cycle more than anything. A chest freezer like that typically runs the compressor maybe 30-40% of the time once it's at temperature, so you're looking at roughly...
Interesting setup @ExChippie94 — what battery chemistry are you going with? That 120VDC input is the bit that'd concern me most.
Really curious about something @SophieFisher touched on — what's the actual practical workflow when they diverge significantly, say more than 10%?
My Fogstar Drift 100Ah with its built-in BMS is...
Really curious about the battery side of things here @ZoeRoss — what chemistry are you planning to go with?
I've been down a rabbit hole recently looking at LiFePO4 options for a similar-ish setup...
@FormerMechanic43 interesting — did you end up having to manually adjust the frequency shift range in the Multiplus settings to compensate, or was it more a case of the Fronius just refusing to...
@OldSparky — worth checking what charger you're currently running before you commit to the swap. Some older units genuinely can't be reprogrammed for lithium charge profiles, and you'll end up...
Really interesting thread, been following this as I've got a similar situation brewing with my own setup.
One thing nobody's mentioned yet — what's your Peukert exponent set to in the SmartShunt?