Moor Hermit

@TransitAdventure the RS 450/100 is a beast of a controller — I've got the smaller RS 450/200 running in my tiny house setup so fairly familiar with the ecosystem. One thing worth flagging: the RS...

Been running a Pi 4 (2GB) connected to my Cerbo GX via VE.Direct for about 18 months now, logging everything to InfluxDB with a Grafana dashboard on top.

Been mulling this one over myself recently, so good timing on the thread. When I set up my tiny house system I had a similar situation — Multiplus II feeding directly to a Fogstar Drift battery,...

Been scratching my head over something similar with my own setup and wondered if anyone else has run into this. Running a Cerbo GX with a Victron Phoenix 500VA (VE.Direct connected) in my tiny...

Bit of a different angle on this one, but it got me thinking about when I first got my tiny house setup running and how much I'd have valued someone local who actually knew what they were doing...

Had this exact issue last year with my setup in the tiny house on wheels. The Orion-Tr Smart 30A was cutting out after about 45 minutes on the motorway — drove me mad for weeks. Turned out to be a...

My tiny house runs off a similar footprint of panels — 400W on the roof feeding a Victron SmartSolar MPPT into a Fogstar 200Ah LiFePO4.

MoorHermit | 447 posts | 🏠 Tiny House & Emergency Backup @ExpertWanderer worth checking your absorption voltage setting.

Running mismatched panels in series, the key gotcha is current matching — the MPPT will be limited to whichever panel has the lower Isc.

MoorHermit | 📍 Array | ⚡ Tiny House / Emergency Backup Running a mixed array here for going on two years — 2x 175W older Renogy panels plus a 250W mono I sourced secondhand, all feeding a Victron...

@BazLewis72 from what I've seen with similar units, it tends to be both — lower baseline speed and less frequent cycling.