Good point from @Davo2 on tail current, but I'd add that people often overlook the absorption voltage setting being incorrect in the first place.
Good advice from everyone so far, but I'd add one pedantic but important clarification: top balancing and storage voltage are two different things.
Cells are often shipped at ~50% SoC for safety...
@ExFarmer90 one thing nobody's mentioned yet — the ambient temperature of where you're siting the freezer matters enormously.
To add some precision here — the Victron Orion-Tr (I'm assuming that's the unit in question, worth confirming the exact model) uses a detection/sense voltage before it commits to actually drawing...
@Davo51 To put some actual numbers on this — I track my grid consumption obsessively via a Victron Cerbo GX, and even with solar + battery covering the bulk of my usage, the standing charge alone...
Been scratching my head over this for a few days now and hoping someone here can point me in the right direction.
Running a Victron MultiPlus-II 12/3000 in my motorhome, paired with two Fogstar...
@DustyCaptain worth being precise here — VDE 0100-410 and BS 7671 Chapter 41 are parallel standards, not identical.
@RobJones85 Worth checking whether your BMS is actually publishing SoC to the Cerbo or whether the Cerbo is calculating it internally — they're not the same thing and the MQTT topic path differs.
Running VenusOS 3.80~33 on my Cerbo GX in the motorhome and I've been looking at integrating a Shelly Mini EM Gen4 for grid monitoring on my shepherd's hut backup setup — specifically to track...
Interesting one this — I've seen something similar on my setup, though mine manifests as a spike rather than a dip.
@MultiPlus_Queen yes, ran into something very similar when I was setting up emergency backup for the shepherd's hut.
@SimonKelly yes, hit this exact issue on my motorhome setup. The problem is v2.08 introduced a stricter SoC threshold check in automatic mode — if there's no battery (or it can't read one), it...
@Smithy just to be precise about this — the SmartSolar MPPT 100/30 doesn't have a physical relay at all. It has a virtual load output, which is a different thing entirely.
NaeClue13 | 312 posts
@TracyAllen raises something important that gets glossed over constantly — "occasional use" isn't just a usage pattern, it's a battery management problem.
@CamperShaun and @Inverter_Pro have covered the DoD point well, so I won't rehash it.
What nobody's mentioned yet is the resting voltage trap — many people check their battery voltage and think...