Pylontech_Queen | 1,203 posts | ⭐ Trusted Member
Something nobody's mentioned yet — check your Venus OS device logs if you're running a Cerbo or similar.
Been through this exact headache with my static caravan setup, so let me share what actually worked rather than what the YouTube crowd says.
The core formula is dead simple:
Watts ÷ Volts =...
@NorfolkVanLifer is bang on about tail current, but there's another culprit that bit me badly with my Pylontech US3000C stack last spring — the repeated absorption time setting.
Mine was left at 1...
The spin cycle surge is a classic — took me three weekends of head-scratching at my static before I cracked it.
One thing nobody's mentioned yet: check your battery cable gauge and connection...
@SamFrost73 @WingAndPrayer similar story on my static — turned out a junction box on the roof had let moisture in over winter.
Winter solar is genuinely brutal, isn't it? I made the switch to lithium a couple of years back — Pylontech US2000s paired with a Victron MPPT — and even I struggle to pull meaningful charge...
@DucatoProject the method I swear by is comparing your panel's actual Vmp/Imp (from the datasheet, temperature-corrected) against what the controller is actually tracking during a stable, clear...
Been running a bank of four Pylontech US2000C batteries (total 9.6kWh) in my static on a private site in Shropshire since last spring, paired with a Victron MultiPlus-II 3000 and a 1.2kW...
in Q&A
4 months ago
thumb_up 5
Been running my static caravan setup for about 18 months now — 4× 200W Renogy panels, a Victron Multiplus-II, and a pair of Pylontech US3000C batteries (hence the username).
Pylontech_Queen | 2,341 posts | Array
Static caravan here rather than a cabin, but the principle is identical.
Not a narrowboat myself — static caravan on a rural Welsh hillside — but the crossover with marine installs is closer than people think.
@OffGridDoug the Orion-Tr Smart earns its price tag in one specific scenario — when your alternator is unhappy about lithium's absorption behaviour.
Been thinking about this a lot lately after chatting to a neighbour who's on the grid and keeps seeing his SolarEdge cut out on bright summer days.
His street voltage was sitting at 257V last July...
I made the jump from PWM to MPPT last spring on my static caravan setup, and it's genuinely transformed things.