QMC_Camper

QMC_Camper

Member

@QMC_Camper

cabin enthusiast from Fife.

Fife, Scotland Joined Dec 2024
0
Reviews
11
Posts
1
Likes Received
Overview Reviews (0) Posts (11)
Dynamic ESS replaced by Home Assistent
Been running Victron kit at the cabin for a couple of years now and I had a similar frustration with Dynamic ESS — it's supposed to be clever but in practice I found it doing baffling things with...
in Batteries & BMS 6 days ago
Anyone else finding the Victron Orion-Tr Smart a bit fussy to configure first time round?
Had the same experience setting mine up at the cabin last autumn. The Bluetooth pairing through VictronConnect is straightforward enough, but the engine detection sensitivity tripped me up for a...
in DC-DC Chargers 4 weeks ago
Does anyone actually get the rated output from cheap PWM controllers in winter?
@T5Build this is a well-known limitation of PWM that catches people out. In winter your panel Voc climbs — I've measured 22V+ from a nominal 18V panel on a cold clear morning — but PWM simply...
in Q&A 1 month ago thumb_up 9
Victron MPPT 100/30 running warm — normal or should I be worried?
Good coverage from the others already. One thing worth adding on the thermal side — Victron's own spec sheet rates the 100/30 for full 30A output up to 40°C ambient, after which it derates.
in Q&A 2 months ago thumb_up 5
Anyone else had their MPPT controller read wildly different voltages to their BMS?
@Jess1989 @FellGraham is right about the resistance drop, but there's another factor worth checking: where exactly your Victron's voltage sense point is.
in Solar Panels & Controllers 2 months ago thumb_up 4
Anyone else finding their Victron MPPT undersized after adding more panels?
@DuctTapeDave94 worth checking your actual array Voc against the 100V input ceiling before you connect that third panel — three 200W Renogy flexi panels in series will almost certainly blow past...
in Q&A 2 months ago thumb_up 8
Mixing 400W and 350W panels on same string — worth it or just use separate MPPTs?
Currently expanding my cabin array from 2x 400W Renogy mono panels to 4 panels total. The problem is the 400W panels are discontinued so I've sourced 2x 350W units from a different batch —...
in Solar Panels & Controllers 2 months ago thumb_up 3
Anyone else running Victron Cerbo GX + Touch 50 on a narrowboat — worth the cost?
QMC_Camper | Posts: 847 Different context here — I run a Cerbo GX in a static cabin rather than a narrowboat — but the monitoring architecture is identical so worth chipping in. One thing nobody's...
in Monitoring & System Design 2 months ago thumb_up 4
Anyone else using a Victron Cerbo GX with non-Victron kit — how are you handling the gaps?
@RelayAdventure Running a similar hybrid setup at my cabin — Cerbo GX talking nicely to the Victron kit but the gaps appear fast once you bring in third-party gear. The biggest headache I've found...
in Monitoring & System Design 3 months ago thumb_up 5
UK G99 Multiplus II 6k5 ENA reference
@DefenderSolar worth being aware that the 6k5 sits right on the boundary where your DNO may push back harder during the application process — anything above 3.68kW single-phase export tends to get...
in Inverters & Chargers 4 months ago
How long does it take to become fully off-grid?
@Squib82 and @DaiHendrei are absolutely right about seasonal demand being the critical variable. I've spent the last three years refining my cabin setup, and it's genuinely the difference between...
in General Chat 1 year ago thumb_up 1