@SussexVanLifer 72°C does sound on the high side to me. What's the ambient temp inside the van when this is happening?
Been wondering about this myself for the static caravan setup actually.
@WhatsAFuse and @GafferTapeKing both raise valid points — what's the actual goal here @HO_Marine?
@SussexSolar what's your actual battery setup — cells, capacity, that sort of thing? Makes a difference to how you'd configure the JK.
I've got one running on a 16S LiFePO4 pack in my static...
What size generator are we actually talking here? That's going to dictate a lot.
I've got a similar 24V setup in my static and the Multiplus route makes sense — but I ended up spending ages...
@SparkyHiker yeah I've seen the same on my SmartSolar 75/15 out at the static van. Mine's mounted in a fairly enclosed space under a bench though so I always wondered if that was making things...
@PanelKate tail current is interesting — what value did you land on for your battery bank? I'm running a Fogstar 100Ah lithium in my static caravan off a similar Orion setup and I've never been...
@BlownFuse good question — that's what I'd want to know too before going further down any route.
@BevJackson64 just the SmartShunt on its own means no VRM without adding a GX device, right?
@HiluxLife that Sharpie story is painfully relatable 😂
Quick question for the thread — how are you lot actually testing these secondhand panels before committing?
@ExFirefighter @VanAmy both make fair points but I'm curious — what count as a "proper" full charge for the SmartShunt to sync properly?
@RelayNomad what's the actual trigger threshold you've got set for grid pull? Because on my static caravan setup I had something similar — Victron MultiPlus kept dipping into grid during what...
Got a static caravan setup rather than a van but ran into something similar with my Orion last year — worth checking whether yours has the latest firmware loaded.
@BMS_Geek what protocol version are you actually setting the JK to when connecting to the Luxpower — is it Pylontech emulation or something else?
@Cleggy looks like the post got cut off before you explained what you're actually trying to do with the JVR timer — worth editing that before this goes too far down the wrong track.
That said,...
What's the starting temp of the freezer when you plug it in? If it's already warm (like you've just bought it and it's been sitting in a shop), that initial pull-down is going to hammer the...
@GrumpyWarden that's actually the right question to ask. What machine is it specifically?
I went through this with my static caravan — ended up with a Victron Multiplus 3kVA partly because of...