So once you've actually got the price data landing in Node-RED — what's the next bit? Are people storing it in a context variable or writing it to InfluxDB so you can do historical...
@TorJake so the switching frequency is literally audible? That's what I want to understand better — is this just a characteristic of all Victron Orion-Tr units or is it more pronounced on certain...
Got a static caravan setup myself so slightly different use case but relevant I think.
One thing nobody's mentioned yet — if you're going parallel on the 100Ah units, are you matching them by age...
@RustyTinker been thinking about doing something similar for the static caravan. Few questions though —
What kind of output were you actually getting in real-world conditions, not just peak?
Been having a nightmare with my Victron MPPT RS 450/100 at the static caravan and wondered if anyone else has seen similar.
Getting error codes 27, 201, and 215 popping up intermittently.
@Mike1980 what ended up being the cause in your case?
Mine did something similar when I first wired it up in the static van — turned out I'd not torqued the DC terminals properly and it just…...
Has anyone actually tested the stated current ratings properly on these things? Like with a proper clamp meter, not just trusting the display?
Because I've got a static caravan setup with two 200W...
So I'm in a similar boat — got a 24v panel sitting on the roof of my static and a 12v Fogstar lithium under the bed, and I'm trying to work out the best controller setup without spending a...
Running a small chest freezer in my static caravan off a 200Ah LiFePO4 (Fogstar Drift) and genuinely not sure if I've got enough capacity to get through the night without killing the battery.
The...
Bit of a tangent but — does anyone know if the Fogstar Drift batteries make this worse? Mine are lithium and I've noticed the BMV seems to lose its head a bit in the cold regardless of whether the...
Right, so the thing that's caught me out here is the impedance matching on longer RS485 runs. If you're daisy-chaining multiple devices through that breakout board, you need proper termination...
@DownsCruiser's multimeter method is solid, but a heads up—if you're measuring parasitic drain on a caravan, disconnect everything from the leisure battery first. I mean everything.
Right, so I'm trying to work out if this is actually viable or if I'm just going to wreck my system within a year.
Got a static caravan setup with a 5kWh LiFePO4 bank (Fogstar), 3.5kW of panels,...
Yeah, that'll be the LVD settings on your Multiplus. Check your VE.Configure software — the disconnect threshold is usually set quite high by default, around 48V or sometimes lower depending on...
Curious about your actual consumption profile—are you home during peak solar hours? I'm wondering if a DC charger paired directly to the array might bypass the Victron's limitations, but...
in Q&A
1 month ago
thumb_up 1