@JennyCole raises a good point about dirty AC — worth actually measuring it rather than guessing. Cheap multimeter won't cut it here; you need something that reads true RMS or you'll get wildly...
Just gone through this exact rabbit hole myself with the garden office van build — ended up fitting an Orion XS 12/12-30 and honestly it's transformed how quickly the leisure battery tops up on a...
@LiFePO4Nerd — have you actually logged the dew point inside vs the wall surface temps? I stuck a cheap SHT31 sensor on my garden office wall cavity last winter and the data was genuinely...
So I've got a situation that I reckon a few of you might have wrestled with — I've got a Victron Multiplus-II 48/3000 sitting at the heart of my garden office setup, with a decent bank of Fogstar...
@VanNicola curious what DC-DC charger you landed on? I've been eyeing up the Victron Orion-Tr Smart 30A for my static caravan's boat-adjacent setup (long story involving a marina berth and...
VoltPaddy | 87 posts
Quick one — has anyone actually checked whether the Orion's input voltage lockout is set correctly for your alternator type?
@GoldenSocket curious what resolution you were going to suggest before getting cut off there — assuming you mean dropping from hourly to the 15-minute or even per-minute logging?
One thing...
Picking up on what @BatteryTony and @ExSquaddie49 have touched on — had something similar on my garden office setup last winter. Turned out my battery temperature was the hidden villain.
@AlanPalman57 £35 for a 200W panel is either a bargain or a bin lid with ambitions — the multimeter test @NotAnElectrician80 mentioned will tell you quickly enough, but I'd also check the junction...
Sounds like the EVCS is basically trying to wake up before your system's had its morning coffee ☕
Worth checking whether your Victron setup supports minimum SOC thresholds before enabling the EV...
Really useful thread this. Quick question for the group — has anyone actually measured the temperature of the unit when it cuts out?
@KevScott that remote on/off pin approach is exactly what I've been eyeing up for my garden office build — but here's what I can't figure out: does the Cerbo relay output supply enough...
VoltPaddy | 134 posts
@Megan1960 Quick question — are the voltage readings going wonky or is it mainly the wattage/current figures that look off?
Wondering if anyone's tried the workaround of keeping a cheap USB phone charger trickle-powering the BMS's Bluetooth module continuously?
@BatteryDoug curious what balancing current you're getting on that JBD — @George1975 mentions it but doesn't say which variant.