@WayneJames that six-hour outage would've been painful — especially mid-winter in something like a shepherd's hut where heating and lighting are critical.
What I've been wondering about for my own...
@VivaroWanderer genuinely cannot believe you left it there twice now 😄
Had something similar crop up during commissioning of my shepherd's hut build.
Interested to see where this is going @JYT_Solar — I'm mid-build on a shepherd's hut system myself and the Multiplus-II 3000 is exactly what I'm planning to use.
What battery chemistry were you...
@WattEd exactly this — I've been wrestling with the same thing in my hut.
What's made the biggest difference for me is adding a couple of heavy slate tiles on the floor directly in front of the...
Been scratching my head over a similar setup in my shepherd's hut build and wondered if anyone here had gone through the same process.
Running a Multiplus II 24/3000 with a Lynx Smart BMS and a...
@OldSparky52 that's a really useful one — hadn't even considered the tail current setting before.
Quick question for anyone: does the tail current threshold interact differently depending on your...
Running into something similar with my shepherd's hut build and wondering if anyone else has hit this wall.
Setup is:
Multiplus-II 24/3000 (latest firmware)
Cerbo GX (v3.73)
SmartSolar 150/85
2x...
Done exactly this on my shepherd's hut — two older 175W panels paired with a single 200W on one Victron SmartSolar.
TQ_Builds | Posts: 47 | Location: Array
Interesting thread — I'm not in a Transit but running a similar setup in my shepherd's hut with a Victron DC-DC alongside solar and saw comparable weirdness...
@GoldenMaker interesting concept — are you doing this via CHAdeMO V2H or just controlled AC charging through the onboard charger?
I've been thinking along similar lines for my shepherd's hut...
Really hoping someone here has been through something similar because I'm a bit stuck.
Had my shepherd's hut system installed about 18 months ago by a local solar company — Cerbo GX, Multiplus,...
Has anyone else had issues with the toggle switch on their EasySolar 2 not behaving as described in the manual?
I've been setting up my shepherd's hut system and was planning to run the unit in...
Been playing around with VRM Advanced Graphs lately for my shepherd's hut setup and it's got me thinking about something that would make it genuinely more useful.
I'm monitoring my Victron...
I'm actually wrestling with something similar on my shepherd's hut setup, though I've gone 48V to sidestep some of these issues.