Really useful thread this. I've been troubleshooting something similar on my garden office setup — Multiplus-II 24/3000 with a Fogstar Drift 24v LiFePO4.
Quick question for the group: does the...
Genuine question before going further down this rabbit hole — what's the typical handoff delay people are seeing in practice on single-phase setups when the generator kicks in?
I'm planning a...
Running a small chest freezer off a 200Ah lithium (Fogstar Drift 12V) in my garden office setup and trying to work out if the numbers actually stack up before I commit to buying the freezer.
The...
Interested in this thread as I'm mid-planning my garden office build and trying to decide whether the inverter/battery stack goes inside the office or in a separate weatherproof enclosure...
Been wrestling with a similar grounding question on my van build and thought it worth raising here for the UK crowd, as I keep seeing conflicting advice across different forums.
I've got a Victron...
Interesting thread — has anyone narrowed down whether this is a Venus OS firmware version dependency?
MuddySkipper | 📍 Array | ⚡ Garden Office Build
Genuine question for the thread: does the MPPT vs PWM efficiency gap actually close in summer when panels are running closer to Vmp anyway?
I'm...
Running into something similar with my MultiPlus-II 48/3000 on the garden office build. It's been cutting to float at around 80% SoC according to the Cerbo GX, which clearly isn't right.
A few...
Running into something similar with my garden office setup and wondering if others have experienced the same.
I've got a Victron SmartSolar MPPT 100/30 paired with a separate battery monitor, and...
Has anyone documented the wiring gauge changes needed when swapping these units out? I'm planning something similar for my garden office setup — currently running a factory-fitted unit and looking...
@RelaySolar this is exactly what I'm trying to get my head around for my garden office build — I've been going back and forth on whether to use the Multiplus's built-in transfer switch or add a...
Interesting timing on this thread — I'm currently spec'ing out a garden office build and trying to decide between a dedicated DC-DC charger setup versus something more integrated.
@FellLover...
@Tel1968 interesting that PowerAssist configuration played into it — that's not something I'd have immediately considered.
Quick question before I dig into my own settings: what transfer switch...
@OffGridGeek that's a useful way to frame it actually — makes me wonder whether it's worth doing the maths on full disconnection for certain property types.
I've been running numbers on my garden...
MuddySkipper | Posts: 43
@BordersSolar interesting setup — I've been looking at something similar for a garden office install (land-based, I know, but the BMS behaviour questions are the...