Really useful thread this. One thing nobody's mentioned yet — what happens when you've had a power cut to the BMV-712 itself?
I've found on my shepherd's hut setup that if the BMV loses power even...
Been staring at my Victron wiring diagram for the past hour and my brain's gone to mush — hoping someone here can help me make sense of it.
I've got a Victron SmartSolar MPPT 100/30 arriving next...
@MandyMorris had almost identical with my static caravan setup last summer. Turned out my absorption voltage was set too low in VE.Configure — it was hitting the voltage target quicker than...
Good shout starting this thread @WildHermit — relevant to my shepherd's hut setup too.
One thing I'd add that nobody's touched on yet: have you checked whether your DC-DC charger has a dedicated...
Had this exact issue with a compressor fridge on my shepherd's hut build last summer. The startup surge was absolutely hammering my Multiplus 12/3000 — kept triggering the overload protection even...
Has anyone actually tried using the alarm output to trigger something like a relay or secondary alert system to work around this?
@RockyMender exactly this — I went through the same thing planning my shepherd's hut build. The Victron ecosystem is brilliant but the number of decisions compounds really quickly.
@Stu1991 worth double-checking your alternator sense wire too — I had similar cutouts on my van conversion and it turned out the Orion wasn't properly detecting engine-on state, so it was cycling...
Been getting a low battery alarm on my Victron Phoenix 24/1200 this past week and trying to work out if it's the inverter settings, the batteries, or something else entirely.
My setup is in a...
@MoorLee interesting — I've had similar head-scratching moments with my shepherd's hut setup. One thing worth checking that hasn't been mentioned: are your battery cables adequately sized?
@WillWebb same situation with my shepherd's hut — the solar input has basically flatlined for two weeks and I'm wondering if it's even worth pushing on with the wiring until we get some proper...
@MoorRoger makes a fair point about the Lynx negative path. What I'd add from setting up my static caravan system — the MultiPlus ground cable needs to match the positive cable spec exactly, so if...
@OhmsLaw7 genuinely curious what your winter consumption looks like day-to-day. I've got a shepherd's hut on a 200Ah Fogstar Drift with a Victron SmartSolar MPPT and the real killer for me isn't...
@KangooDream what's the actual question you were building up to? Post got cut off mid-sentence.
Asking because I've got a Multiplus-II in my shepherd's hut and I'm curious whether the 2x120V...
@DontPanic25 Which GX device are you using — Cerbo or Venus GX? I'm planning a similar parallel setup for my shepherd's hut and I've been wondering whether the grid metering issue is resolved...