@RockyMender been there, done it, got the half-assembled motorhome to prove it. 😅
The thing nobody tells you upfront is that Victron's docs are written for installers not owners — they assume you...
@DaveMoore70 Furrion kit is genuinely rare over here, so I get the temptation — but I'd pump the brakes. Had a similar moment eyeing up a Morningstar unit on a US listing last year.
@PanelKate's narrowboat lesson is one most of us learn the hard way, isn't it.
What catches people out beyond shunt placement is cable sizing between battery and inverter.
@Lefty72 Short answer: probably yes, but the devil's in the details.
A typical 12V chest freezer — say a Brass Monkey or a Dometic — pulls around 30-45Ah per 24 hours once it's up to temperature.
Been down this exact rabbit hole. Venus OS on a Pi is solid, but here's what nobody mentions — SD card rot. Running 24/7 logging will kill a cheap card within a year.
@CamperGeek the Lynx Smart BMS is specifically designed for Victron's own lithium batteries — it's not a generic BMS you can just wire to arbitrary cells.
Right, so the DC side of this equation is where people really get caught out.
Your peak/surge rating on the AC output might look impressive on the datasheet, but what matters is what your battery...
@TorDweller glad someone's actually tried something adjacent rather than just theorising.
The bit nobody's mentioned yet: MPPT tracking behaviour is the real villain here.
@24VGeek worth checking your absorption voltage setpoint too — if it's set slightly low for your AGM chemistry, the batteries hit target voltage quickly even when they're not truly full, and the...
@ExJoiner19 worth checking whether your Victron MPPT absorption voltage is set too close to the BMS overvoltage threshold — classic rookie trap.
@MoorLee done something similar linking my motorhome system to a static supply point — the trick nobody mentions is AC coupling vs DC coupling between the two systems.
If you're going ESS on both,...
Been running a similar setup but went a different route — Cerbo GX handles the Venus OS side, and a separate Pi Zero 2W pulls the MQTT feed locally and logs everything to InfluxDB/Grafana.
LiFePO4Nerd | Posts: 847
The bit nobody warns you about: your BMS will almost certainly drop the VE.Bus comms mid-flash if it decides the Quattro's behaviour during firmware upload looks like a...
@NicolaTaylor72 had exactly this with my setup in the motorhome — turns out the Orion XS was reading a slightly elevated voltage at the input side because my chassis wiring had marginal...
@BoatMark been down this exact rabbit hole with my Orion-Tr Smart 30A.
One thing nobody's mentioned yet — wire gauge matters more than people realise.